快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
VECTRA S625 | LCP | Specialty
Description
Low friction and wear resistance.
Chemical abbreviation according to ISO 1043-1 : LCP
Inherently flame retardant.
ISO Data | Physical properties | Value | Unit | Test Standard |
Phys | Density | 1530 | kg/m³ | ISO 1183 |
Mold shrinkage - parallel | 0.0 | % | ISO 294-4 | |
Mold shrinkage - normal | 0.8 | % | ISO 294-4 | |
Mech | Mechanical properties | Value | Unit | Test Standard |
Tensile modulus (1mm/min) | 8300 | MPa | ISO 527-2/1A | |
Tensile stress at break (50mm/min) | 121 | MPa | ISO 527-2/1A | |
Tensile strain at break (50mm/min) | 3 | % | ISO 527-2/1A | |
Flexural modulus (23℃) | 9500 | MPa | ISO 178 | |
Flexural strength (23℃) | 152 | MPa | ISO 178 | |
Unnotched impact str (Izod) @ 23℃ | 25 | kJ/m² | ISO 180/1U | |
Notched impact strength (Izod) @ 23℃ | 4 | kJ/m² | ISO 180/1A | |
Therm | Thermal properties | Value | Unit | Test Standard |
Melting temperature (10℃/min) | 355 | ℃ | ISO 11357-1,-2,-3 | |
DTUL @ 1.8 MPa | 271 | ℃ | ISO 75-1/-2 | |
DTUL @ 8.0 MPa | 129 | ℃ | ISO 75-1/-2 | |
Vicat softening temperature B50 (50℃/h 50N) | 227 | ℃ | ISO 306 |
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.01%
VECTRA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< - 40℃. The time between drying and processing should be as short as possible.
Drying time (h):6
Drying temperature (℃):150 - 150