旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PBT HX3061HP PBT复合树脂,自然色
  • 产 品:PBT HX3061HP PBT复合树脂,自然色
  • 产 地:沙伯基础创新
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

Valox* Resin
Valox* Resin All Series
The Valox* family of thermoplastic polyester resins are semi-crystalline materials based on polybutylene terephthalate (PBT) and/or polyethylene terephthalate (PET) polymers. Valox resins are highly tailorable, combining heat, chemical resistance, and outstanding electrical properties with exceptionally good processability and surface appearance.

Valox* Resin PBT HX3061HP 数据表
PBT for compounding/fibers only. Not intended for injection molding. Biocompatible. Melt viscosity: 250C at 21.6 kgf is 1450-1850 poise. Available in Natural color (1001) only.

Property
TYPICAL PROPERTIES (1)
 

MECHANICAL Value Unit Standard
Tensile Stress,yld,Type I,50mm/min 590 kgf/cm² ASTM D 638
Tensile Stress,brk,Type I,50mm/min 260 kgf/cm² ASTM D 638
Tensile Strain,yld,Type I,50mm/min 3.7 % ASTM D 638
Tensile Strain,brk,Type I,50mm/min 140 % ASTM D 638
Tensile Modulus,5mm/min 26500 kgf/cm² ASTM D 638
Flexural Stress,yld,1.3mm/min,50mm span 840 kgf/cm² ASTM D 790
Flexural Modulus,1.3mm/min,50mm span 24400 kgf/cm² ASTM D 790
Tensile Stress,yield,50mm/min 50 MPa ISO 527
Tensile Stress,break,50mm/min 49 MPa ISO 527
Tensile Strain,yield,50mm/min 3.2 % ISO 527
Tensile Strain,break,50mm/min 8.6 % ISO 527
Tensile Modulus,1mm/min 2600 MPa ISO 527
Flexural Stress,yield,2mm/min 80 MPa ISO 178
Flexural Modulus,2mm/min 2200 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,notched,23℃ 3 cm-kgf/cm ASTM D 256
Izod Impact,notched,-30℃ 3 cm-kgf/cm ASTM D 256
Instrumented Impact Total Energy,23℃ 254 cm-kgf ASTM D 3763
Izod Impact,notched 80*10*4 +23℃ 4 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 -30℃ 3 kJ/m² ISO 180/1A
Charpy 23℃,V-notch Edgew 80*10*4 sp=62mm 4 kJ/m² ISO 179/1eA
THERMAL Value Unit Standard
Vicat Softening Temp,Rate B/50 167 ASTM D 1525
HDT,0.45 MPa,3.2mm,unannealed 120 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 49 ASTM D 648
CTE,-40℃ to 40℃,flow 7.60E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 7.80E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,flow 7.60E-05 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 7.80E-05 1/℃ ISO 11359-2
Vicat Softening Temp,Rate B/50 173 ISO 306
Vicat Softening Temp,Rate B/120 169 ISO 306
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 49 ISO 75/Af
PHYSICAL Value Unit Standard
Specific Gravity 1.31 - ASTM D 792
Mold Shrinkage,flow,3.2mm(5) 1.5-2 % SABIC Method
Mold Shrinkage,xflow,3.2mm(5) 1.5-2 % SABIC Method
Melt Flow Rate,250℃/2.16 kgf 50 g/10 min ASTM D 1238
Melt Viscosity 1650 poise SABIC Method
Density 1.31 g/cm³ ISO 1183
Water Absorption,(23℃/sat) 0.34 % ISO 62
Moisture Absorption(23℃/50% RH) 0.08 % ISO 62
Melt Volume Rate,MVR at 250℃/2.16 kg 45 cm³/10 min ISO 1133
Source GMD,last updated:2012/04/11
Parameter Compounding Extrusion Value Unit
Drying Temperature 110-120
Drying Time 4-6 hrs
Drying Time(Cumulative) 8 hrs
Maximum Moisture Content 0 %
Melt Temperature 245-260
Barrel-Zone 1 Temperature 200-230
Barrel-Zone 2 Temperature 240-255
Barrel-Zone 3 Temperature 240-275
Barrel-Zone 4 Temperature 240-275
Adapter Temperature 240-275
Die Temperature 240-275
Waterbath Temperature 25-35
Source GMD,last updated:2012/04/11

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
Buy SABIC Innovative please contact xiang zhang Engineering plastics

1、Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
2、Only typical data for selection purposes. Not to be used for part or tool design.
3、This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
4、Internal measurements according to UL standards.POM V20-HT 中粘度
5、Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

关健字:【Valox* Resin PBT HX3061HP