旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PET V9561 阻燃PET,玻璃纤维30%填充,高耐热
  • 产 品:PET V9561 阻燃PET,玻璃纤维30%填充,高耐热
  • 产 地:沙伯基础创新
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

Valox* Resin
Valox* Resin All Series
The Valox* family of thermoplastic polyester resins are semi-crystalline materials based on polybutylene terephthalate (PBT) and/or polyethylene terephthalate (PET) polymers. Valox resins are highly tailorable, combining heat, chemical resistance, and outstanding electrical properties with exceptionally good processability and surface appearance.

Valox* Resin PET V9561 数据表
Flame retardant PET, 30% Glass fiber filled. Offering a good balance in CTI , GWIT , High Heat and mechanical performances.

Property
TYPICAL PROPERTIES (1)

MECHANICAL Value Unit Standard
Tensile Stress,yield,5mm/min 125 MPa ISO 527
Tensile Stress,break,5mm/min 125 MPa ISO 527
Tensile Strain,yield,5mm/min 2 % ISO 527
Tensile Strain,break,5mm/min 2 % ISO 527
Tensile Modulus,1mm/min 12000 MPa ISO 527
Flexural Stress,yield,2mm/min 190 MPa ISO 178
Flexural Modulus,2mm/min 10750 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,notched 80*10*4 +23℃ 7 kJ/m² ISO 180/1A
Izod Impact,notched 80*10*4 -30℃ 7 kJ/m² ISO 180/1A
Charpy 23℃,V-notch Edgew 80*10*4 sp=62mm 7 kJ/m² ISO 179/1eA
THERMAL Value Unit Standard
CTE,23℃ to 80℃,flow 1.90E-05 1/℃ ISO 11359-2
CTE,23℃ to 80℃,xflow 6.70E-05 1/℃ ISO 11359-2
Vicat Softening Temp,Rate B/50 225 ISO 306
Vicat Softening Temp,Rate B/120 230 ISO 306
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 230 ISO 75/Af
PHYSICAL Value Unit Standard
Density 1.71 g/cm³ ISO 1183
Water Absorption,(23℃/sat) 0.05 % ISO 62
Moisture Absorption(23℃/50% RH) 0.25 % ISO 62
Melt Volume Rate,MVR at 280℃/5.0 kg 33 cm³/10 min ISO 1133
FLAME CHARACTERISTICS Value Unit Standard
UL Compliant,94V-0 Flame Class Rating(3)(4) 0.8 mm UL 94 by SABIC-IP
Source GMD,last updated:2006/11/03
Parameter Injection Molding Value Unit
Drying Temperature 120-130
Drying Time 4-6 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 270-290
Nozzle Temperature 260-280
Front-Zone 3 Temperature 270-290
Middle-Zone 2 Temperature 260-280
Rear-Zone 1 Temperature 250-270
Hopper Temperature 40-60
Mold Temperature 90-120
Source GMD,last updated:2006/11/03

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
Buy SABIC Innovative please contact xiang zhang Engineering plastics

1、Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
2、Only typical data for selection purposes. Not to be used for part or tool design.
3、This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
4、Internal measurements according to UL standards.TPX报价
5、Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

关健字:【Valox* Resin PET V9561