旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PC DDF029 含碳粉,玻璃纤维,阻燃剂.导电PC
  • 产 品:PC DDF029 含碳粉,玻璃纤维,阻燃剂.导电PC
  • 产 地:美国液氮
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

LNP STAT-KON* POLYCARBONATE COMPOUND
STRENGTH PLUS TAILORED ELECTRICAL PROPERTIES
Polycarbonate-based LNP Stat-Kon compounds contain electrically active additives that provide controlled surface resistivity, from antistatic, through conductive, to electromagnetic interference (EMI) shielding.

LNP™ STAT-KON™ Compound PC DDF029 塑料物性表

Also known as:LNP™ Stat-kon™ Compound DF-FR
Product reorder name:DDF029
LNP STAT-KON* DDF029 is a compound based on Polycarbonate resin containing Carbon Powder, Glass Fiber, Flame Retardant. Added features of this material include: Electrically Conductive.

MECHANICAL Value Unit Standard
Tensile Stress,break 830 kgf/cm² ASTM D 638
Tensile Strain,break 2.9 % ASTM D 638
Tensile Modulus,50mm/min 45600 kgf/cm² ASTM D 638
Flexural Stress 1350 kgf/cm² ASTM D 790
Flexural Modulus 44900 kgf/cm² ASTM D 790
Tensile Stress,break 81 MPa ISO 527
Tensile Strain,break 2.8 % ISO 527
Tensile Modulus,1mm/min 4600 MPa ISO 527
Flexural Stress 134 MPa ISO 178
Flexural Modulus 4800 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 45 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 5 cm-kgf/cm ASTM D 256
Instrumented Impact Energy @ peak,23℃ 74 cm-kgf ASTM D 3763
Multiaxial Impact 23 cm-kgf ISO 6603
Izod Impact,unnotched 80*10*4 +23℃ 32 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 6 kJ/m² ISO 180/1A
THERMAL Value Unit Standard
HDT,0.45 MPa,3.2mm,unannealed 141 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 135 ASTM D 648
CTE,-40℃ to 40℃,flow 4.32E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 5.04E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,flow 4.43E-05 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 5.19E-05 1/℃ ISO 11359-2
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 135 ISO 75/Af
PHYSICAL Value Unit Standard
Density 1.37 g/cm³ ASTM D 792
Moisture Absorption,50% RH,24 hrs 0.11 % ASTM D 570
Mold Shrinkage,flow,24 hrs(5) 0.4 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 0.5 % ASTM D 955
Mold Shrinkage,flow,24 hrs(5) 0.44 % ISO 294
Mold Shrinkage,xflow,24 hrs(5) 0.49 % ISO 294
Moisture Absorption(23℃/50% RH) 0.2 % ISO 62
ELECTRICAL Value Unit Standard
Surface Resistivity 1.E+05-1.E+10 Ohm ASTM D 257
FLAME CHARACTERISTICS Value Unit Standard
UL Compliant,94V-0 Flame Class Rating(3)(4) 1.8 mm UL 94 by SABIC-IP
Source GMD,last updated:2004/10/01
Parameter Injection Molding Value Unit
Drying Temperature 120
Drying Time 4 hrs
Maximum Moisture Content 0.02 %
Melt Temperature 305-325
Front-Zone 3 Temperature 320-330
Middle-Zone 2 Temperature 310-320
Rear-Zone 1 Temperature 295-305
Mold Temperature 80-110
Back Pressure 0.2-0.3 MPa
Screw Speed 30-60 rpm
Source GMD, last updated:2004/10/01

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
Buy SABIC Innovative please contact xiang zhang Engineering plastics

1、Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
2、Only typical data for selection purposes. Not to be used for part or tool design.
3、This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
4、Internal measurements according to UL standards.
5、Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

关健字:【LNP™ STAT-KON™ Compound PC DDF029