旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PC/ABS C2805 添加PTFE耐磨,阻燃,中等耐热
  • 产 品:PC/ABS C2805 添加PTFE耐磨,阻燃,中等耐热
  • 产 地:沙伯基础创新
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

Cycoloy* Visualfx* Resin
Tough Yet Beautiful
Cycoloy PC/ABS Visualfx Resins provide molded-in effects that can eliminate the need for modifications after molding while still offering the impact and processing advantage that Cycoloy Resin is known for.
This can provide cleaner and more vibrant part aesthetics that will last as long as the part lasts. Visualfx Resins include Sparkle and Porcelain effects as well as several metallic and natural material effects.
Available in a variety of colors and base resins.

Cycoloy* Resin C2805 数据
LNP* Lubricomp* Cycoloy* C2805 compound is a PTFE reinforced PC+ABS, wear resistant, flame retardant compound for moving components in business equipment. Medium heat performance

Property
TYPICAL PROPERTIES (1)

MECHANICAL Value Unit Standard
Tensile Stress,yld,Type I,50mm/min 630 kgf/cm² ASTM D 638
Tensile Stress,brk,Type I,50mm/min 520 kgf/cm² ASTM D 638
Tensile Strain,brk,Type I,50mm/min 110 % ASTM D 638
Flexural Stress,yld,2.6mm/min,100mm span 970 kgf/cm² ASTM D 790
Flexural Modulus,2.6mm/min,100mm span 27700 kgf/cm² ASTM D 790
K-factor xE-10,PV=2000 psi-fpm vs Steel 430 - SABIC Method
Coefficient of Friction on steel,Static 0.16 - ASTM D 1894
Coefficient of Friction on steel,Kinetic 0.21 - ASTM D 1894
IMPACT Value Unit Standard
Izod Impact,notched,23℃ 13 cm-kgf/cm ASTM D 256
THERMAL Value Unit Standard
HDT,1.82 MPa,6.4mm,unannealed 82 ASTM D 648
Relative Temp Index,Elec 60 UL 746B
Relative Temp Index,Mech w/impact 60 UL 746B
Relative Temp Index,Mech w/o impact 60 UL 746B
PHYSICAL Value Unit Standard
Specific Gravity 1.22 - ASTM D 792
Mold Shrinkage,flow,3.2mm(5) 0.4-0.5 % SABIC Method
Mold Shrinkage,xflow,3.2mm(5) 0.3-0.5 % SABIC Method
ELECTRICAL Value Unit Standard
Hot Wire Ignition{PLC) 3 PLC Code UL 746A
High Ampere Arc Ign,surface{PLC} 0 PLC Code UL 746A
Comparative Tracking Index(UL){PLC} 1 PLC Code UL 746A
FLAME CHARACTERISTICS Value Unit Standard
UL Recognized,94V-0 Flame Class Rating(3) 1.5 mm UL 94
UL Recognized,94-5VB Rating(3) 2.49 mm UL 94
Source GMD,last updated:2011/09/19
Parameter Injection Molding Value Unit
Drying Temperature 75-80
Drying Time 3-4 hrs
Drying Time (Cumulative) 8 hrs
Maximum Moisture Content 0.04 %
Melt Temperature 230-275
Nozzle Temperature 230-275
Front-Zone 3 Temperature 225-275
Middle-Zone 2 Temperature 215-260
Rear-Zone 1 Temperature 210-255
Mold Temperature 50-70
Back Pressure 0.3-0.7 MPa
Screw Speed 40-70 rpm
Shot to Cylinder Size 30-80 %
Vent Depth 0.038-0.076 mm
Source GMD,last updated:2011/09/19
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
PLEASE CONTACT US FOR AVAILABILITY IN YOUR REGION.

(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.
(5) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
PC/ABS合金塑料报价网:http://www.pa66-suliao.com/product/gcsuliao/PC/ABS/