旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
POM 527UVE NC010 中粘度,抗紫外线稳定剂
  • 产 品:POM 527UVE NC010 中粘度,抗紫外线稳定剂
  • 产 地:DuPont 杜邦
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

DuPont™ Delrin® 数据
杜邦™塑钢®
acetal resin
缩醛树脂
UV Resistant/Weatherable Resins
防紫外线/耐候性树脂

Delrin® 527UVE NC010 (formerly DE20556) is a medium viscosity acetal homopolymer with UV stabilizers having extremely low VOC emissions, developed for automotive interior applications.
塑钢®527uve nc010(原de20556)是一种中等粘度聚甲醛均聚物与紫外线稳定剂具有极低的挥发性有机化合物的排放,汽车内部应用开发的。

Property
Test Method
Units
Value
Identification
Resin Identification
Part Marking Code
ISO 1043
ISO 11469
 
POM
>POM<
Mechanical
Yield Stress
Yield Strain
Strain at Break
50mm/min
Nominal Strain at Break
Tensile Modulus
Flexural Modulus
Notched Charpy Impact Strength
-30°C (-22°F)
23°C (73°F)
Unnotched Charpy Impact Strength
-30°C (-22°F)
23°C (73°F)
ISO 527
ISO 527
ISO 527
ISO 527
ISO 527
ISO 178
ISO 179/1eA
ISO 179/1eU
MPa (kpsi)
%
%
%
MPa (kpsi)
MPa (kpsi)
2
kJ/m
2
kJ/m
72 (10.4)
17
35
27
3100 (450)
3000 (435)
8
9
270
280

Property
Test Method
Units
Value
Thermal
Deflection Temperature
1.80MPa
Melting Temperature
10°C/min
CLTE, Parallel
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
55 - 100°C (130 - 212°F)
CLTE, Normal
-40 - 23°C (-40 - 73°F)
23 - 55°C (73 - 130°F)
55 - 100°C (130 - 212°F)
ISO 75-1/-2
ISO 11357-1/-3
ISO 11359-1/-2
ISO 11359-1/-2
°C (°F)
°C (°F)
E-4/C (E-4/F)
E-4/C (E-4/F)
93 (200)
178 (350)
1.0 (0.56)
1.1 (0.62)
1.5 (0.83)
1 (0.56)
1.1 (0.62)
1.5 (0.83)
Rheological
Melt Mass-Flow Rate
190°C, 2.16kg
Melt Volume-Flow Rate
ISO 1133
ISO 1133
g/10 min
3
cm /10 min (ml/10 min)
15
13
Other
Density
Water Absorption
Immersion 24h
Molding Shrinkage
Normal, 2.0mm
Parallel, 2.0mm
ISO 1183
ISO 62, Similar to
ISO 294-4
3           3
kg/m (g/cm )
%
%
1420 (1.42)
0.4
1.9
2

Property
Test Method
Units
Value
Processing - Injection Molding
Melt Temperature Range
Melt Temperature Optimum
Mold Temperature Range
Mold Temperature Optimum
Drying Time, Dehumidified Dryer
Drying Temperature
Processing Moisture Content
Hold Pressure Range
 
°C (°F)
°C (°F)
°C (°F)
°C (°F)
h
°C (°F)
%
MPa (kpsi)
200-210 (390-410)
205 (400)
80-100 (175-210)
90 (195)
2-4
80 (175)
<0.2
80-100 (12-15)

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc. Unless otherwise stated, ISO Mechanical properties measured at 4.0mm, ASTM properties measured at 3.2mm, and test temperatures are 23°C.
The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
The DuPont Oval Logo, DuPont™, The miracles of science™ and Delrin® are trademarks or registered trademarks of DuPont Company. Copyright© 2012

湘樟塑胶网版权:http://www.pa66-suliao.com/product/gcsuliao/POM/