快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
LNP* STAT-KON* COMPOUND
LNP STAT-KON RESIN ALL SERIES
LNP* Stat-Kon* composites contain electrically conductive additives. They and span a broad range of surface resistivity and electrical activity, from antistatic, through conductive, to electromagnetic interference (EMI) shielding. Stat-Kon* composites offer cost-effective solutions when products must avoid static electricity buildup or discharge. LNP specialty compound offerings are available in a broad portfolio of standard and engineering materials.
LNP™ STAT-KON™ Compound PP MS000IL 塑料物性表
Also known as:LNP™ Stat-kon™ Compound MS-HI LE Product reorder name:MS000IL
LNP* Stat-kon* MS000IL is a compound based on Polypropylene resin containing Stainless Steel. Added features of this material include: High Impact, Low Extractible, Electrically Conductive, food contact compliant raw materials and metal detectable.
MECHANICAL | Value | Unit | Standard |
Tensile Stress,yield | 210 | kgf/cm² | ASTM D 638 |
Tensile Stress,break | 150 | kgf/cm² | ASTM D 638 |
Tensile Strain,yield | 7.1 | % | ASTM D 638 |
Tensile Strain,break | 76 | % | ASTM D 638 |
Tensile Modulus,50mm/min | 12800 | kgf/cm² | ASTM D 638 |
Flexural Stress | 280 | kgf/cm² | ASTM D 790 |
Flexural Modulus | 13000 | kgf/cm² | ASTM D 790 |
Tensile Stress,yield | 20 | MPa | ISO 527 |
Tensile Stress,break | 16 | MPa | ISO 527 |
Tensile Strain,yield | 5.6 | % | ISO 527 |
Tensile Strain,break | 38.9 | % | ISO 527 |
Tensile Modulus,1mm/min | 1170 | MPa | ISO 527 |
Flexural Stress | 24 | MPa | ISO 178 |
Flexural Modulus | 1180 | MPa | ISO 178 |
IMPACT | Value | Unit | Standard |
Izod Impact,unnotched,23℃ | 135 | cm-kgf/cm | ASTM D 4812 |
Izod Impact,notched,23℃ | 9 | cm-kgf/cm | ASTM D 256 |
Instrumented Impact Energy @ peak,23℃ | 111 | cm-kgf | ASTM D 3763 |
Multiaxial Impact | 101 | cm-kgf | ISO 6603 |
Izod Impact,unnotched 80*10*4 +23℃ | NB | kJ/m² | ISO 180/1U |
Izod Impact,notched 80*10*4 +23℃ | 10 | kJ/m² | ISO 180/1A |
THERMAL | Value | Unit | Standard |
HDT,1.82 MPa,3.2mm,unannealed | 52 | ℃ | ASTM D 648 |
CTE,-40℃ to 40℃,flow | 9.90E-05 | 1/℃ | ASTM E 831 |
CTE,-40℃ to 40℃,xflow | 1.17E-04 | 1/℃ | ASTM E 831 |
CTE,-40℃ to 40℃,flow | 1.01E-04 | 1/℃ | ISO 11359-2 |
CTE,-40℃ to 40℃,xflow | 1.17E-04 | 1/℃ | ISO 11359-2 |
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm | 52 | ℃ | ISO 75/Af |
PHYSICAL | Value | Unit | Standard |
Density | 0.96 | g/cm³ | ASTM D 792 |
Mold Shrinkage,flow,24 hrs(5) | 1.3 | % | ASTM D 955 |
Mold Shrinkage,xflow,24 hrs(5) | 1.4 | % | ASTM D 955 |
Mold Shrinkage,flow,24 hrs(5) | 1.29 | % | ISO 294 |
Mold Shrinkage,xflow,24 hrs(5) | 1.38 | % | ISO 294 |
Density | 0.96 | g/cm³ | ISO 1183 |
ELECTRICAL | Value | Unit | Standard |
Surface Resistivity | 1.E+02 - 1.E+06 | Ohm | ASTM D 257 |
Source GMD,last updated:2011/04/19 |
Parameter Injection Molding | Value | Unit |
Drying Temperature | 80 | ℃ |
Drying Time | 4 | hrs |
Melt Temperature | 225-250 | ℃ |
Front-Zone 3 Temperature | 240-250 | ℃ |
Middle-Zone 2 Temperature | 215-225 | ℃ |
Rear-Zone 1 Temperature | 195-205 | ℃ |
Mold Temperature | 30-50 | ℃ |
Back Pressure | 0.2-0.3 | MPa |
Screw Speed | 30-60 | rpm |
Source GMD,last updated:2011/04/19 |