旭化成 南亚 东丽 巴斯夫 罗地亚 普立万 长春

杜邦 泰科纳 三菱工程 GE料 朗盛 RTP 舒尔曼

改性尼龙 改性PBT 代理PTFE聚四氟乙烯粉

塑料种类

通用塑料 PVCGPPSHDPELDPEHIPSSAN

工程塑料 PVDFPSUPPSUPOPPFAPA4TPA9TPA6TPA610PA1010PA12PA11EPSEMAPPOCOCPA46PA6PA6/66PA612PEEKPPEPTFE

热塑弹性体CPETPVSISSBSSBRPBEPOETPX

联系我们

塑胶原料报价
PA66 RFL33 含有玻璃纤维和聚四氟乙烯尼龙
  • 产 品:PA66 RFL33 含有玻璃纤维和聚四氟乙烯尼龙
  • 产 地:美国液氮
  • 价 格:电话报价
  • 库 存:20吨
  • 交 货:江苏苏州
  • 苏州希普能:185 5121 3137 谭经理

LNP* Lubricomp* Compound
LNP Lubricomp Resin All Series
LNP* Lubricomp* compounds provide improved wear resistance and lower friction by combining engineering resins with internal lubricants. Lubricomp compounds, which can also be stiffened with glass or other fiber, can help extend product life and reduce or eliminate squeaks and other noise from moving parts. LNP specialty compound offerings are available in a broad portfolio of standard and engineering materials.

LNP™ Lubricomp™ Compound PA66 RFL33 塑料数据

Also known as:LNP™ Lubricomp™ Compound RFL-4033
Product reorder name:RFL33
LNP* Lubricomp* RFL33 is a compound based on Nylon 66 resin containing Glass Fiber, PTFE. Added features of this material include: Internally Lubricated.

MECHANICAL Value Unit Standard
Tensile Stress,yield 1220 kgf/cm² ASTM D 638
Tensile Stress,break 1220 kgf/cm² ASTM D 638
Tensile Strain,yield 3.1 % ASTM D 638
Tensile Strain,break 3.1 % ASTM D 638
Tensile Modulus,50mm/min 70300 kgf/cm² ASTM D 638
Flexural Stress 1820 kgf/cm² ASTM D 790
Flexural Modulus 56200 kgf/cm² ASTM D 790
Tensile Stress,yield 118 MPa ISO 527
Tensile Stress,break 118 MPa ISO 527
Tensile Strain,yield 3 % ISO 527
Tensile Strain,break 3 % ISO 527
Tensile Modulus,1mm/min 6440 MPa ISO 527
Flexural Stress 183 MPa ISO 178
Flexural Modulus 5800 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 58 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 6 cm-kgf/cm ASTM D 256
Instrumented Impact Energy @ peak,23℃ 77 cm-kgf ASTM D 3763
Multiaxial Impact 21 cm-kgf ISO 6603
Izod Impact,unnotched 80*10*4 +23℃ 35 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 6 kJ/m² ISO 180/1A
THERMAL Value Unit Standard
HDT,0.45 MPa,3.2mm,unannealed 261 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 247 ASTM D 648
CTE,-40℃ to 40℃,flow 8.28E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 3.96E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,flow 8.30E-05 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 3.90E-05 1/℃ ISO 11359-2
HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm 260 ISO 75/Bf
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 243 ISO 75/Af
PHYSICAL Value Unit Standard
Density 1.37 g/cm³ ASTM D 792
Moisture Absorption,50% RH,24 hrs 0.6 % ASTM D 570
Mold Shrinkage,flow,24 hrs(5) 0.5-0.7 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 1.6-1.8 % ASTM D 955
Mold Shrinkage,flow,24 hrs(5) 0.64 % ISO 294
Mold Shrinkage,xflow,24 hrs(5) 1.7 % ISO 294
Wear Factor Washer 19 10^-10 in^5-min/ft-lb-hr ASTM D 3702 Modified
Dynamic COF 0.39 - ASTM D 3702 Modified
Static COF 0.45 - ASTM D 3702 Modified
Density 1.36 g/cm³ ISO 1183
Source GMD,last updated:2008/09/24
Parameter Injection Molding Value Unit
Drying Temperature 80
Drying Time 4 hrs
Maximum Moisture Content 0.15-0.25 %
Melt Temperature 280-305
Front-Zone 3 Temperature 295-305
Middle-Zone 2 Temperature 280-295
Rear-Zone 1 Temperature 265-275
Mold Temperature 95-110
Back Pressure 0.2-0.3 MPa
Screw Speed 30-60 rpm
Source GMD,last updated:2008/09/24

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
Buy SABIC Innovative please contact xiang zhang Engineering plastics

1、Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
2、Only typical data for selection purposes. Not to be used for part or tool design.
3、This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
4、Internal measurements according to UL standards.
5、Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

关健字:【LNP™ Lubricomp™ Compound PA66 RFL33