快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
- 产 品：PC/ABS C4210HF 玻璃10%增强,高耐热,抗冲击
- 产 地：沙伯基础创新
- 价 格：电话报价
- 库 存：20吨
- 交 货：江苏苏州
- 苏州希普能：185 5121 3137 谭经理
Cycoloy* Glass Filled Resin
High Flow, Strength & Stiffness
Cycoloy Resin glass filled, multipurpose Polycarbonate / Acrylonitrile Butadiene Styrene (PC/ABS) alloy offer enhanced stiffness and strength compared to Cycoloy 1000 resin. Provides high flow for thin wall applications.
Cycoloy* Resin C4210HF 数据
PC+ABS Blend with 10% Glass Reinforce. High flow, High heat resistance., Excellent balance strength/rigidity. Good impact/appearance.
Property
TYPICAL PROPERTIES (1)
| MECHANICAL | Value | Unit | Standard |
| Tensile Stress,yld,Type I,5mm/min | 860 | kgf/cm² | ASTM D 638 |
| Tensile Stress,brk,Type I,5mm/min | 860 | kgf/cm² | ASTM D 638 |
| Tensile Strain,yld,Type I,5mm/min | 3 | % | ASTM D 638 |
| Tensile Strain,brk,Type I,5mm/min | 3 | % | ASTM D 638 |
| Tensile Modulus,5mm/min | 49900 | kgf/cm² | ASTM D 638 |
| Flexural Stress,brk,1.3mm/min,50mm span | 1420 | kgf/cm² | ASTM D 790 |
| Flexural Modulus,1.3mm/min,50mm span | 43800 | kgf/cm² | ASTM D 790 |
| Tensile Stress,yield,5mm/min | 90 | MPa | ISO 527 |
| Tensile Stress,break,5mm/min | 90 | MPa | ISO 527 |
| Tensile Strain,break,5mm/min | 3.2 | % | ISO 527 |
| Tensile Modulus,1mm/min | 4700 | MPa | ISO 527 |
| Flexural Stress,yield,2mm/min | 125 | MPa | ISO 178 |
| Flexural Stress,break,2mm/min | 135 | MPa | ISO 178 |
| Flexural Modulus,2mm/min | 4250 | MPa | ISO 178 |
| Hardness,H358/30 | 116 | MPa | ISO 2039-1 |
| Hardness,Rockwell R | 121 | - | ISO 2039-2 |
| IMPACT | Value | Unit | Standard |
| Izod Impact,unnotched,23℃ | 48 | cm-kgf/cm | ASTM D 4812 |
| Izod Impact,unnotched,-30℃ | 48 | cm-kgf/cm | ASTM D 4812 |
| Izod Impact,notched,23℃ | 7 | cm-kgf/cm | ASTM D 256 |
| Izod Impact,notched,-30℃ | 6 | cm-kgf/cm | ASTM D 256 |
| Instrumented Impact Total Energy,23℃ | 152 | cm-kgf | ASTM D 3763 |
| Instrumented Impact Total Energy,-30℃ | 81 | cm-kgf | ASTM D 3763 |
| Izod Impact,unnotched 80*10*4 +23℃ | 30 | kJ/m² | ISO 180/1U |
| Izod Impact,notched 80*10*4 +23℃ | 8 | kJ/m² | ISO 180/1A |
| Izod Impact,notched 80*10*4 -30℃ | 6 | kJ/m² | ISO 180/1A |
| THERMAL | Value | Unit | Standard |
| HDT,0.45 MPa,3.2mm,unannealed | 134 | ℃ | ASTM D 648 |
| HDT,1.82 MPa,3.2mm,unannealed | 126 | ℃ | ASTM D 648 |
| HDT,1.82 MPa,6.4mm,unannealed | 128 | ℃ | ASTM D 648 |
| CTE,-40℃ to 40℃,flow | 4.00E-05 | 1/℃ | ASTM E 831 |
| CTE,-40℃ to 40℃,xflow | 7.50E-05 | 1/℃ | ASTM E 831 |
| Thermal Conductivity | 0.2 | W/m-℃ | ISO 8302 |
| PHYSICAL | Value | Unit | Standard |
| Specific Gravity | 1.22 | - | ASTM D 792 |
| Mold Shrinkage,flow,3.2mm(5) | 0.3-0.5 | % | SABIC Method |
| Mold Shrinkage,xflow,3.2mm(5) | 0.3-0.5 | % | SABIC Method |
| Melt Flow Rate,260℃/5.0 kgf | 37 | g/10 min | ASTM D 1238 |
| Source GMD,last updated:2005/03/18 | |||
THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURPOSES.
PLEASE CONTACT US FOR AVAILABILITY IN YOUR REGION.
(1) Typical values only. Variations within normal tolerances are possible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection purposes. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.
(5) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.