快速查找
主营塑料
产品推荐
- ⊕PPS OL003A 含玻璃纤维,聚四氟乙
- ⊕PBT 420SE0 玻纤30%增强,阻燃级
- ⊕PBT 310SE0 非增强型,PBT阻燃树脂
- ⊕PP HJ730 高流动,高钢性,高耐热
- ⊕PP FB71U6 耐热级,抗UV,阻燃级
- ⊕PA6 73G30L NC010 玻璃纤维30%增
- ⊕PA66 70G43L NC010 玻璃纤维43%增
- ⊕PA66 70G33L NC010 玻璃纤维33%增
- ⊕PA66 70G30L NC010 玻璃纤维30%增
- ⊕PA66 80G33L NC010 玻纤33%增强,
- ⊕PA66 FR50 NC010A 玻纤25%增强,阻
- ⊕POM 900P NC010 低粘度,热稳定,低
- ⊕POM 500P NC010 中高粘,热稳定,低
- ⊕POM 100P NC010 高粘度,韧性好,热
- ⊕PBT SK605 NC010 玻璃纤维30%增强
- ⊕PA66 1300G 玻纤增强级
联系我们
塑胶原料报价
- 产 品：LCP E840i LDS 含40%矿物填料
- 产 地：泰科纳
- 价 格：电话报价
- 库 存：20吨
- 交 货：江苏苏州
- 苏州希普能：185 5121 3137 谭经理
VECTRA® E840ILDS BLACK
VECTRA E840i LDS | LCP | Mineral Reinforced
Description
40% Mineral filled Laser Direct Structuring grade.
Chemical abbreviation according to ISO 1043-1 : LCP
Inherently flame retardant
UL-Listing V-0 in black at 1.5mm thickness per UL 94 flame testing.
UL = Underwriters Laboratories (USA)
| ISO Data | Physical properties | Value | Unit | Test Standard |
| Phys | Density | 1810 | kg/m³ | ISO 1183 |
| Mold shrinkage - parallel | 0.1 | % | ISO 294-4 | |
| Mold shrinkage - normal | 0.5 | % | ISO 294-4 | |
| Mech | Mechanical properties | Value | Unit | Test Standard |
| Tensile modulus (1mm/min) | 9300 | MPa | ISO 527-2/1A | |
| Tensile stress at break (5mm/min) | 102 | MPa | ISO 527-2/1A | |
| Tensile strain at break (5mm/min) | 3.4 | % | ISO 527-2/1A | |
| Flexural modulus (23℃) | 10500 | MPa | ISO 178 | |
| Flexural strength (23℃) | 109 | MPa | ISO 178 | |
| Charpy notched impact strength @ 23℃ | 5 | kJ/m² | ISO 179/1eA | |
| Unnotched impact str (Izod) @ 23℃ | 33 | kJ/m² | ISO 180/1U | |
| Notched impact strength (Izod) @ 23℃ | 6 | kJ/m² | ISO 180/1A | |
| Therm | Thermal properties | Value | Unit | Test Standard |
| Melting temperature (10℃/min) | 335 | ℃ | ISO 11357-1,-2,-3 | |
| DTUL @ 1.8 MPa | 227 | ℃ | ISO 75-1/-2 | |
| Coeff.of linear therm. expansion (parallel) | 0.12 | E-4/℃ | ISO 11359-2 | |
| Coeff.of linear therm. expansion (normal) | 0.27 | E-4/℃ | ISO 11359-2 | |
| Elec | Electrical properties | Value | Unit | Test Standard |
| Relative permittivity - 100 Hz | 4.97 | - | IEC 60250 | |
| Dissipation factor - 100 Hz | 289 | E-4 | IEC 60250 | |
| Volume resistivity | 2.00E+14 | Ohm*m | IEC 60093 | |
| Surface resistivity | 2.00E+16 | Ohm | IEC 60093 |
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.01%
VECTRA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< - 40℃. The time between drying and processing should be as short as possible.
Drying time (h):6
Drying temperature (℃):150 - 150